ACC radar Solution for Ford Winch

RickBadSas25
Oct 27, 2025

Rank 0

Mon at 4:43 pm

Anyone have a solution for relocating ACC radar when using a factory ford bronco winch with modular bumper.
I have ordered Mountains 2 Metal camera relo kit.

Rank 0

Mon at 6:45 pm

#1
I used the relocation bracket from DV8. Went on fine and adaptive cruise still works.
Deano Bronc

That's a terrible idea, when do we start?

Mon at 7:19 pm

#2
Are you referring to the ACC or the front camera? I ask because I don't see an ACC relocation bracket on M2M's website.

I know that Turn Offroad makes one: https://turnoffroad.com/products/2021-ford-bronco-acc-relocation-bracket?_pos=1&_sid=159a074a2&_ss=r

DV8 also makes one: https://dv8offroad.com/products/for...elocation-bracket?_pos=1&_sid=f7a8ed1b1&_ss=r

and Icon also makes one: https://www.lethalperformance.com/i...2024-bronco-45209.html?utm_source=chatgpt.com

These all look very similar, and all move it up into the grill.
OnX Trail Guide and Tread Lightly Member.
4 Door BadSquatch | Soft-top | Velocity Blue | 2.7 Auto

Rank 42

Mon at 9:33 pm

#3
I added a Turn front winch mounting plate with winch, and believed Ford's description of their Winch mounting option that says you can just turn off ACC. But you can't really turn it off, nor can you turn off pre-collision assist.
So I bought the Turn ACC relocation bracket because it was about the cheapest, and they ALL were very similar. I also bought DV8's front camera relocation solution.
The install of the ACC bracket is a real pain in the petushka. Everything back to the radiator comes off, including the headlights!
One installation note on the ACC bracket: I looked at the install instructions from 4 different vendors. Some showed the ACC cable going straight up the radiator. If you free up just a bit more cable, it fits fine up the driver's side of the radiator, and can be zip tied to the side.
It worked perfectly! Highly recommended if you put a winch on...

You must log in or register to post here.